Parameter

Description

Translate

 

–

Step Size

Sets the step size for the translation in x and y.

–

X-Direction

Sets the translation in x direction. The reset button resets the value to the default.

–

Y-Direction

Sets the translation in y direction. The reset button resets the value to the default.

Scale

–

X-Direction

Sets the scaling factor in x direction. The reset button resets the value to the default.

–

Y-Direction

Sets the scaling factor in y direction. The reset button resets the value to the default.

Rotate

 

–

Rotation Center

Defines the rotation center around which the image is rotated. It is indicated in the Image View with a pin.

–

Angle

Sets the rotation angle. The reset button resets the value to the default.

–

Custom

You can set the pin in the image to your custom rotation center.

Flip/Mirror

–


Horizontally

Mirrors the image in horizontal direction.

–


Vertically

Mirrors the image in the vertical direction.

Shear

–

Enable

Activated: Activates the shearing mode and displays the three shearing pins in the image.

–

Reset Shearing Pins

Resets the pins to the default location.

Reset All Parameters

Resets all alignment parameters in the wizard to the default values.

Parameter

Description

Finish

Saves the changes and closes the wizard.

Cancel

Closes the wizard without saving.