This method allows you to shift the content of an image in the direction of the 3 axes X, Y and Z. To adjust the shift, use the respective sliders or input fields under Parameters.

Parameter

Description

Third Dimension

Only available if Show All is activated and if the acquired image is three dimensional.

Selects the third dimensional shift.

–

2D Slices

The third dimension is shifted by 0 which means the image is only shifted in X/Y direction.

–

Z

The shift is in z-direction.

–

C

Shifts the channel.

If you have a 32 channel image, the first 30 channels are copied and/or interpolated into the last ones (for an 32 channel lambda image this would result in a shift to the red spectrum).

When selected, the checkbox Adjust per channel is not available.

Adjust per Channel

Only available for images with multiple channels.

Opens a list with the channels to allow an individual adjustment of each channel.

–

Process Channel

Shifts this channel according to the input.

–

Skip Channel

Skips this channel when processing. This channel will not be in the output image.

–

Copy Channel

This channel is copied into the output image without a shift.

Shift in X

Selects the shift of the content in X direction.

Shift in Y

Selects the shift of the content in Y direction.

Shift in Z

Selects the shift of the content in Z direction.