1. You have opened a ZEN Connect project.
  1. In the correlative workspace or in the ZEN Connect tool, select the image(s) you want to align.
  2. In the ZEN Connect tool, for the Alignment button, select Manual Alignment Wizard and click on it.
  3. The ZEN Connect Alignment Wizard opens.
  4. To translate the selected image(s), set the distance in x and y direction with the Translate parameter section on the left.
  5. The translation is immediately displayed in the Image View.
  6. To scale the image, set the scaling factor in x and y in the Scale section.
  7. The scaling is adjusted according to the input.
  8. To rotate the image, first select the Rotation Center and then enter an Angle. The current rotation center is represented in the image by a pin.
  9. The selected image(s) is/are rotated.
  10. To flip/mirror the image horizontally, click on .
  11. To flip/mirror the image vertically, click on .
  12. If you want to shear your image, activate Enable.
  13. Additional shearing pins are displayed in the image. The two pins that form the "baseline" for shearing a connected by a line.
  14. Use the two pins to position the baseline and then move the pinpoint to shear the image.
  15. Click on Finish to save the alignment and close the wizard.
  1. You have aligned the selected image(s) in the ZEN Connect project.

Alignment Handles

You can also use the alignment manages of the selected image(s) to translate, scale, and rotate the image.

View Options

You can use the available options of the Dimensions tab to adjust the image view (e.g. use the Global-Z slider). The image which is adjusted by the Dimensions tab can be selected in the tree view of the Select Node For Dimensions tab.