1. You are on the Acquisition tab.
  2. You have started the live mode via the Live button.
  1. Activate the Panorama checkbox.
  2. Move the sample to the desired start field of the panorama image to be acquired.
  3. Check the defined exposure time again if necessary.
  4. In the Display tab you can adjust the Display curve to avoid over-exposures in your images.
  5. In the Imaging Setup tool, you can check the settings before/after the experiment.
  6. The Advanced Imaging Setup is only displayed if you have activated the Enable Advanced Imaging Setup checkbox under Tools > Options > Acquisition > Acquisition Tab > Enable Imaging Setup.
  7. In the Acquisition Mode tool, click the Get button to transfer the active camera settings into the experiment.
    As an alternative you can define your experiment settings here as well.
  8. In the Panorama tool you can adjust several options for automatic or manual stitching if desired.
  9. Finally save your experiment with a suitable name in the Experiment Manager.