Control element

Description


Left Thumb Wheel

Rotates the 3D volume around the vertical (Y) axis.


Home View

Switches back to the start view from any view.
A top view of the 3D volume is displayed. Lateral movements and the zoom factor are adjusted so that the 3D volume can be seen at the center of the image area.


Show Measurements

Shows or hides measurements.
If measurements are drawn in, a table of the measurements appears at the right side of the image area.


Show Bounding Box

Shows or hides a bounding box around the 3D volume.


Show Coordinate Axes

Toggles the visibility of the coordinate axes.

  • X axis = red
  • Y axis = green
  • Z axis = blue


Show Scaling

Toggles the visibility of the scaling on each axis.


Show Objects

Only available if you have licensed the 3D Image Analysis functionality.
Toggles the visibility of the analysis objects in the 3D volume.


Spin Mode

Enables the spin mode. This allows to set the 3D volume in continuous motion. For a short description on how to use the spin mode, see Animating the 3D Volume.


Glass Visualization

Only available if you have licensed the 3D Image Analysis functionality.
Switches to glass visualization of the analysis objects in the 3D volume.


Opaque Visualization

Only available if you have licensed the 3D Image Analysis functionality.
Switches to opaque visualization of the analysis objects in the 3D volume.


Send to arivis Pro

Only active, if arivis Pro is installed and licensed on the system.
Starts arivis Pro and imports the image. The image will be displayed with almost identical rendering settings as in the 3D view of ZEN.
Note: Not all render methods produce absolutely identical settings between the two applications. This is due to additional functionalities available for arivis Pro.


Right Thumb Wheel

Rotates the 3D volume around the (Z) axis perpendicular to the screen plane.