With the processing function Slices Replacement you can replace slices of a z-stack with the previous or next slice in the stack.

  1. On the Processing tab, select the method Slices Replacement.
  2. In the Dimensions tab, use the Z-Position slider or input field to select the slice you want to replace.
  3. Click on Replace with Next to replace the selected slice with the next one, or click on Replace with previous if you want to replace the slice with the previous one.
  4. If you want to replace other slices as well, repeat the steps 2 and 3 for each slice.
  5. Each slice is listed in the Replacement Table on the left.
  6. Click on Apply.
  1. You have now replaced the selected slice(s) with its previous and/or next one(s).

Replacing multiple slices

If you have several slices in your z-stack which you want to replace with the following or preceding slice, you can also take the following workflow:

  1. On the Processing tab, select the method Slices Replacement.
  2. Open the Gallery view of your z-stack.
  3. In the Gallery view, press the Ctrl button and select all the slices you want to replace. As an example, you select the slices 34, 37, and 38.
  4. Click on Replace with Next to replace the selected slices with the next ones, or click on Replace with previous if you want to replace the slices with the previous ones.
  5. Each slice is listed in the Replacement Table on the left. As an example, clicking Replace with previous would replace slice 34 with 33, and 37 and 38 with the slice 36.
  6. Click on Apply.
  1. You have now replaced the selected slices with its previous and/or next ones.