ZEISS Microscopy Knowledge Base
Help
ZEISS Microscopy Knowledge Base
Search

Executing the pipeline

You can execute the pipeline step by step or in a single run. To do this, use the executing buttons in the Pipeline toolbar.

Row of five blue control icons: left arrow, small diamond, hollow right triangle, solid right triangle, gray square
Executing Buttons in the Pipeline toolbar

Executing step by step

You can execute the pipeline step by step (back and forth). This method allows to run and undo a single operation. You can either use the executing buttons in the Pipeline toolbar or in the Operation toolbar to go through the operation list.

  1. To run the single operation, click Blue right arrow icon for running the single operation.
  2. To undo the single operation, click Blue left arrow icon for undoing the last operation.
    Note: Undo the last operation executed if you need to change the operation settings.

Executing in a single run

As alternative to executing step by step, execute the pipeline in a single run.

  1. To run the whole pipeline, click Blue right-pointing triangle play icon inside rounded square.
  2. To stop the pipeline execution, click Small gray square icon with darker gray border and lighter center.

Operation status

Operation toolbar segment with a left curved arrow button, vertical chevrons button, and green circle with white check mark
Executing buttons in the Operation toolbar after executing

When the operation is running, this icon Blue circular running icon with two white arrows is shown.

When the operation is completed, this icon Green circular completed icon with white check mark is shown.

ON THIS PAGE

PRODUCTS
ZENX Ray SoftwareEM SoftwareSolutions Lab
ABOUT ZEISS
AboutCareerNewsroomCompliance
Social Media
LinkedInFacebookYouTubeXInstagram
Impressum
Carl-Zeiss-Strasse 22
73447 Oberkochen
Germany
Legal