The sample is usually mounted on a carrier or directly on a sample holder. Select the appropriate sample holder for your configuration when you configure your project.

We offer specific sample holders and carriers with certain markers, e.g., "L"-markers or others. These CorrMic sample holders are necessary for a Shuttle & Find workflow. Note: If you change the holder/carrier after a S&F calibration, the S&F calibration needs to be redone.

  1. You have loaded a ZEN Connect project.
  1. In the button bar below the Image View, click the Select Carrier/Holder button.
  2. Select a template you want to add to your ZEN Connect project, and click OK.
  3. The frame of the selected template is displayed in the Image View of your ZEN Connect project.
  4. To deselect the carrier/holder, click the Select Carrier/Holder drop down list and select Clear/Carrier Holder.

For information on correlative sample holders, see Correlative Sample Holders.