You can create settings for Apotome Plus which can be saved, exported, and imported.

1. You have opened an image based on which you want to define the processing settings.

1. Open the Processing tab and select the method Apotome Plus (adjustable).
2. The parameters are displayed in the Parameters window.
2. In the Input window, select the desired image for Apotome Plus.
   Note: If you use the settings for Direct Processing, use a test image acquired with the identical experiment settings you will be using when running the experiment with Direct Processing.
3. In the Parameters window, activate Show All (if it is not already activated) and click the context menu button
4. A dropdown list is displayed.
4. Select New.
5. The text field gets editable.
5. Enter a name for your settings and press Enter on your keyboard, or click on the save button .
6. You have defined a name for the setting.
6. Configure your settings in the Apotome Plus or PSF settings tab, see also Apotome Plus Tab and PSF Settings Tab Apotome Plus (adjustable). Note that if you want to use this setting in Direct Processing, some parameter settings of the PSF Settings tab are not supported/possible there, especially parameters that rely on external data (like using external PSF).
7. Click and select Save.

1. You have now created and saved an Apotome Plus setting. You can load this setting into the Direct Processing tool to use it for a Direct Processing experiment.

See also

• Using Apotome Plus in Direct Processing