ZEISS Knowledge Base
Help
ZEISS Knowledge Base
Search

ZEN Connect 3D Point Alignment Wizard

This wizard guides you through a 3D point alignment of the image in your ZEN Connect project.

Step 1: Setup Points

1

Point Alignment Options
Options to configure your point alignment. For more information, see 3D Point Alignment Options.

2

Image Window (Tomo3D)
Displays the image(s) you are aligning with a special implementation of the Tomo3D View. With the dropdown in the upper left corner, you can switch to a different 2D view pane as well as display a 3D view. You set the subject points in this view. Note that setting points is only possible in the 2D views.

3

Project Window
Displays all the images of the project except the one you are aligning. Area where you set the reference points.

4

View Options
Displays some general view options of the Dimensions Tab for the respective windows.

Step 2: Preview

This step displays a preview of the finished alignment and the parameter values of each alignment.

Parameter

Description

Algorithm Result

Displays the resulting alignment changes.

Translation

Displays the resulting translation in X-Direction, Y-Direction and Z-Direction.

Rotation

Displays the resulting rotation angle around the x-, y- and z-axis.

Scaling

Displays the resulting scaling factor for the X-Dimension, Y-Dimension and Z-Dimension.

Back

Moves to the previous step of the wizard.

Finish

Saves the changes and closes the wizard.

Cancel

Closes the wizard without saving.

ON THIS PAGE

PRODUCTS
ZENX Ray SoftwareEM SoftwareSolutions Lab
ABOUT ZEISS
AboutCareerNewsroomCompliance
Social Media
LinkedInFacebookYouTubeXFlickrInstagram
Impressum
Carl-Zeiss-Strasse 22
73447 Oberkochen
Germany
Legal