ZEISS Knowledge Base

Parameter		Description
Translate
–	Step Size	Sets the step size for the translation in x and y.
–	X-Direction	Sets the translation in x direction. The reset button resets the value to the default.
–	Y-Direction	Sets the translation in y direction. The reset button resets the value to the default.
Scale
–	X-Direction	Sets the scaling factor in x direction. The reset button resets the value to the default.
–	Y-Direction	Sets the scaling factor in y direction. The reset button resets the value to the default.
Rotate
–	Rotation Center	Defines the rotation center around which the image is rotated. It is indicated in the Image View with a pin.
–	Angle	Sets the rotation angle. The reset button resets the value to the default.
–	Custom	You can set the pin in the image to your custom rotation center.
Flip/Mirror
–	Horizontally	Mirrors the image in horizontal direction.
–	Vertically	Mirrors the image in the vertical direction.
Shear
–	Enable	Activated: Activates the shearing mode and displays the three shearing pins in the image.
–	Reset Shearing Pins	Resets the pins to the default location.
Reset All Parameters		Resets all alignment parameters in the wizard to the default values.

Parameter	Description
Finish	Saves the changes and closes the wizard.
Cancel	Closes the wizard without saving.

ZEN Connect Manual Alignment Wizard

1	Alignment Parameter Control parameters to align the respective image in the project. For more information, see Alignment Parameter Section.
2	Image View Displays the images of the project and allows alignment of images.
3	View Options Here you have the general options of the Dimensions tab. The options are always those of the image selected in the Select Node For Dimensions tab.