Analyzing in Batch Mode

You can also setup the analysis of multiple images with Bio Applications and their settings in Batch Mode, see Running Bio Applications in Batch Mode.

When you run a Bio Application, the image analysis defined in the specific setting is applied to the image.

  1. You have opened the image you want to analyze.
  2. You have created a setting for the Bio Application you want to use, see Creating a General Bio Application Setting.
  1. On the Analysis tab, in the Bio Applications tool, click on the application.
  2. For Setting, select the setting you have created for this application.
  3. Click Run Analysis.
  4. The analysis runs with the selected application and a result screen opens. On this result screen you can see the analyzed picture, charts, and a table.
  5. Click Finish to close the result screen.
  1. You have successfully run your Bio Application. The analysis results are saved in the image file and can be displayed and exported with the Bio Applications view, see Bio Applications View.