The 3D view for ZEN Connect allows you to see and align two 3D volumes from your project. The viewer and functionality is based on the Tomo3D view, see Tomo3D View. For this functionality, you also need the license for the 3D Toolkit.
|
1 |
Image Views |
|
2 |
ZEN Connect Tool |
|
3 |
View Options |
|
Parameter |
Description |
|
|---|---|---|
|
Mirror |
||
|
- |
|
Mirrors the image horizontally. |
|
- |
|
Mirrors the image vertically. |
|
Pre-Align |
In case the two volumes are some distance apart, Pre-Align helps to bring the volumes in close proximity to each other by centering the adjustable volume on the fixed reference volume. |
|
|
Recalculate |
Recalculates the bounding box around the two volumes. A bounding box is displayed surrounding both images. After an alignment of the images, the bounding box can be too large (enclosing empty space) or too small (not surrounding both images anymore) and can be recalculated. |
|
|
Reset |
Resets the alignment as it was when you started this alignment operation. |
|
|
Apply |
Applies the alignment to the ZEN Connect project. |
|
|
Parameter |
Description |
|
|---|---|---|
|
Image Table |
Displays information for the volumes currently opened in the 3D view. |
|
|
– |
# |
Displays the number of the volume. |
|
– |
|
Displays and toggles the visibility of the respective volume. |
|
– |
Name |
Displays the name of the volume. A checkmark in front of the Name column indicates that this volume is currently selected for alignment. |
|
Align Volume 1 |
Starts the alignment mode to align the volume 1. |
|
|
Align Volume 2 |
Starts the alignment mode to align the volume 2. |
|