|
Parameter |
Description |
|
|---|---|---|
|
Viewing Direction |
Here you can set different (2D) viewing directions for the CAD image (e.g. Front, Left, Right, etc.). By selecting another entry from the list, the display of the CAD image will automatically change in the image area. Note that right now only 2D views are supported. |
|
|
Mode |
Here you can select the display of the CAD image. |
|
|
- |
Shading |
Fills the CAD image and applies smooth shading. |
|
- |
Wireframe |
Displays the wireframe of the CAD image. |
|
Zoom |
Here you adjust the zoom factor of the CAD image. If you click on Reset View, the initial view is restored. |
|
|
Export Size |
Here you can select the size of the export image. If you click on Apply, the current view of the CAD image will be exported. Note that the proportion width and height of the image remains the same as shown in the current view. |
|
|
- |
Small |
The maximal side length of the resulting image is set to 1000 pixel. |
|
- |
Medium |
The maximal side length of the resulting image is set to 2000 pixel. |
|
- |
Large |
The maximal side length of the resulting image is set to 3000 pixel. |