1. You have opened a ZEN Connect project in the ZEN Connect Alignment workbench.
2. You have added the necessary alignment tools to the workbench.

1. In the image area or in the tree of the ZEN Connect Alignment tool, select the image you want to align.
2. To translate the selected image, in the Translate tool, set the distance in x and y direction. Alternatively, translate the image via drag and drop in the image area.
3. The translation is immediately displayed in the image area.
3. To scale the image, in the Scale tool, set the scaling factor in x and y. Alternatively, use the handles displayed around the image for scaling.
4. The scaling is adjusted according to the input.
4. To rotate the image, in the Rotate tool, select the Rotation Center and then enter an Angle. The current rotation center is represented in the image by a pin. Alternatively, set the pin manually via drag and drop in the image and rotate the image with the handle.
5. The selected image is rotated.
5. To flip/mirror the image horizontally, in the Flip/Mirror tool, click .
6. To flip/mirror the image vertically, in the Flip/Mirror tool, click .
7. If you want to shear your image, in the Shear tool, activate Enable.
8. Additional shearing pins are displayed in the image. The two pins that form the "baseline" for shearing are connected by a line.
8. Use the two pins to position the baseline and then move the pinpoint to shear the image.
9. The result is displayed instantly in the image area.
9. Click Apply to save all alignment changes.

1. You have aligned the selected image in the ZEN Connect project.