The alignment process lets you align your current session with fiducial marks or previous images. You can align image data manually.

1. A ZEN Connect project is loaded.

1. In the Layer view, or in the Project view, select the image you want to align. Alternatively, you can select a session node to select a couple of images or click Select Region and select the image you want to align.
2. The image is marked with a square in each frame corner. As long as the alignment process is not activated, this is indicated with a little lock next to the cursor.
2. On the selected image, right-click Align Data. Alternatively, in the Project/Layers tool, in the Layers view or in the Project view, right-click and select Align Data.

1. You have activated the alignment process for one or more images. The Alignment toolbar is displayed below the Image view. You can start aligning image data. If you start an alignment on a session node, the set alignment is used for all current and future images of the session. You can use this if you change your sample between different systems and want to align their coordinate systems to each other.